Machine for straightening and cutting SH-6
- The machine is designed for straightening and cutting of
reinforcement, diameter range of 3.9 – 6 mm.
- Installed power of the machine is 9 kW.
- Maximum working speed is 40 – 80 m/min.
- The machine consists of several units which are connected
to one another in the following order:
- Winch for positioning the wire coil – 4 kW
- Central part of the machine consisting of the following
1. Inlet part (pre-straightening)
2. Pulling part
3. Straightening part
4. Measuring device
5. Cutting device